Solid-state combo with 8" speaker, 15 watts, 300 x 410 x 250 mm, Netto Weight 11 kg, Brutto weight MBox 23 kg, Controls for Bass, Mid, Treble and Volume, vented housing. Phones out, FX loop, Collapsible foot on backside.

Solid-state combo with 10" speaker, 30 watts, 340 x 420 x 320 cm, Netto Weight 15 kg, Brutto weight MBox 37 kg, Controls for Bass, Mid, Treble and Volume, vented housing. Inputs for active and passive basses, Phones out, FX loop. Collapsible foot on backside.

Solid-state combo with 12" speaker, 60 watts, 400 x 530 x 330 mm, Netto Weight 19 kg, Brutto weight 21 kg Controls for Bass, Mid, Treble and Volume, vented housing. Inputs for active and passive basses, Phones out, Aux input (2 x cinch) with separate volume control, FX loop. Fan cooling. Collapsible foot on backside.

Solid-state combo with 15" speaker, HF horn and horn off switch, 250 watts RMS New Neodynium Speaker Extreme low-noise input section with gain control. Switchable limiter. Switches for low and high boost. Rotary controls for bass, punch, attack, treble and parametric mids (frequency and level). Phones jack, mute switch, master control. Rear panel: groundlift switch, tuner out, line out (post master), effects loop, DI out with pre/post switch Subsonic switch. Fan cooling (non-permanent). Protections: short-circuit, HF oscillation, overheating, DC, internal speaker 4 ohms. Dimensions: 540 x 630 x 490 mm, Netto weight 29 kg, Brutto weight 35 kg all pots with metal shaft, all heavier parts double side soldered onto the boards to improve stability

Same features as CCL ND 4, but with 8 ohms speakers, 8 ohms version with second speaker output. Dimensions: 540 x 630 x 490 mm, Netto weight 28 kg, Brutto weight 34 kg New Neodynium Speaker

Same features as CCL, but with 2 x 10" speakers, 8 ohms version with second speaker output. Dimensions: 540 x 630 x 490 mm, Netto weight 28 kg, Brutto weight 36 kg New Neodynium Speaker

Solid-state combo with 12" speaker, HF horn and Horn-off switch, 150 watts RMS New Neodynium Speaker Extreme low-noise input section with gain control. Switchable limiter. Switches for low and high boost. Rotary controls for bass, treble and parametric mids (frequency and level). Phones jack, mute switch, master control. Rear panel: groundlift switch, tuner out, line out (post master), effects loop, DI out with pre/post switch. Subsonic switch. Fan cooling (non-permanent). Protections: short-circuit, HF oscillation, overheating, DC, internal speaker 4 ohms. Dimensions: 450 x 480 x 400 mm, Netto weight 21 kg, Brutto weight 25 kg all pots with metal shaft, all heavier parts double side soldered onto the boards to improve stability

1x12" speaker, 1 HF horn with attenuator, 300 watts vented cabinet, 8 ohms New Neodynium Speaker Dimensions: 610 x 533 x 406 mm, Netto weight 17 kg, brutto weight 21 kg

1x15" speaker, 400 watts vented cabinet, 8 ohms New Neodynium Speaker Dimensions: 640 x 670 x 370 mm, Netto weight 23 kg, brutto weight 28 kg

1x15" speaker, 400 watts vented cabinet, 8 ohms Dimensions: 620 x 670 x 490 mm, Netto weight 29 kg, brutto weight 35 kg

2x10" speaker, 1 HF horn with attenuator, 400 watts RMS vented cabinet, 8 ohms Dimensions: 620 x 450 x 430 mm, Netto weight 24 kg, brutto weight 28 kg

4x10" speaker, 300 watts RMS vented cabinet, 8 ohms Dimensions: 620 x 670 x 490 mm, Netto weight 31 kg, brutto weight 37 kg

Warwick WCA 410-4 PRO

4x10" speaker, 1 HF horn with attenuator, 600 watts RMS vented cabinet, 8 ohms New Neodynium Speaker Dimensions: 640 x 710 x 370 mm, Netto weight 32 kg, brutto weight 35 kg

4x10" speaker, 1 HF horn with attenuator, 600 watts RMS vented cabinet, 8 ohms Dimensions: 620 x 670 x 490 mm, Netto weight 39 kg, brutto weight 46 kg

4-ohms version of the 411 Pro

6x10" speaker, 1 HF horn with attenuator, 900 watts RMS vented cabinet, 6 ohms Dimensions: 640 x 1020 x 490 mm, Netto weight 55 kg, brutto weight 62 kg

4-ohms version of the 611 Pro

8x10" speaker, 1 HF horn with attenuator, vented cabinet, 1.600 watts RMS / 4 ohms or 2 x 800 watts / 8 ohms New Neodynium Speaker Dimensions: 640 x 1260 x 490 mm, Netto weight 51 kg, brutto weight 59 kg

eerder 19" 2UH amp head with 300 W. Controls for Gain, Compresser with switch and Control, switchable variable Contour, Bass, Lo Mid, Hi Mid, Treble, Deep and Bright switches, Master Volume. Mute switch and headphone out. DI out with pre/post switch, groundlift, effects loop, line out, tuner out. 470 x 90 x 300 mm Netto Weight: 10 kg, Brutto Weight 11 kg

The ProFet 5.2 takes all of the simplicity in design and quality tone of the ProFet 3.3 and pumps up the power to a beefy 500 watts on 4 Ohm. The updated ProFet 5.2 also includes an improved compressor section that is much easier to use and Warwick’s new adaptive volume control.

19" 2 UH 1.000-watt head with all tube preamp Including a selectable tube power amp on dummy load to create all-tube-amp sounds. Controls for Gain, variable contour with smooth/rough settings, Lo- and Hi-Boost switches, controls for Bass, Mid 1, Mid 2 - both with frequency shift buttons, Treble. Parallel effects loop, DI out with pre post switch, tuner out, line out. Footswitch socket for Contour on/off and 2nd Stage (tube power amp). 470 x 90 x 370 mm Netto Weight: 20 kg, Brutto Weight 22 kg

19" 2 UH 500-watt head with all tube preamp Including a selectable tube power amp on dummy load to create all-tube-amp sounds Controls for Gain, variable contour with smooth/rough settings, Lo- and Hi-Boost switches, controls for Bass, Mid 1, Mid 2 - both with frequency shift buttons, Treble. Parallel effects loop, DI out with pre post switch, tuner out, line out. Footswitch socket for Contour on/off and 2nd Stage (tube power amp). 470 x 90 x 370 mm Netto Weight: 16 kg, Brutto Weight 18 kg

19" 2 UH 1.000-watt head with extensive tone-shaping capabilities Unique voicing section with controls for "Bottom," "Contour," "Growl" and "Attack". Footswitchable 3-band EQ includes bass, treble and parametric mid controls, 2 switchable boost settings, built-in compressor, parallel effects loop, DI out with pre post switch, tuner out, line out. Footswitch socket for EQ on off and boost function 470 x 90 x 370 mm Netto Weight: 19 kg, Brutto Weight 21 kg

19" 2 UH 500-watt head with extensive tone-shaping capabilities Unique voicing section with controls for "Bottom," "Contour," "Growl" and "Attack". Footswitchable 3-band EQ includes bass, treble and parametric mid controls, 2 switchable boost settings, built-in compressor, parallel effects loop, DI out with pre post switch, tuner out, line out. Footswitch socket for EQ on off and boost function. 470 x 90 x 370 mm Netto Weight: 16 kg, Brutto Weight 18 kg